Experienced

Over 30 years in the field

IE, UK & EU

International suppliers

Leading Provider

Of Machinery Solutions

Shop

BIESSE STREAM B1 10.5

Category:

Description

Description and features:


Refurbished machine with warranty
 
CONTROL SYSTEM
• Numerical control multi axes with PC interface
• Programming and control system with visual display and screen color
• Operating system Windows
• Adjustable hanging command board to control the machine
• Incorporated electrical cabinet
TECHNICAL FEATURES 
• Working panel width min – max 100-3.200mm
• Working panel length min – max 150-3.200 mm
• Working panel height with straight edge min – max 10-60 mm
• Edge thickness in coils min – max 0.3-3 mm
• Track feeding speed 10-25 m/min
• Total installed power 34 kW
NOTE: The maximum performance of the machine (working speed, edge thickness, setting fields) are limited by the performance of the individual groups installed
PANEL INTRODUCING AND FEEDING SYSTEM 
• Infeeding guide with adjustment from NC
• Air flotation table to help the introduction of the panel
• Barcode reading device
• Slide driving chain
• Top pressure unit made of a rubber belt with stain-resistant coating
• Top pressure unit with electronic positioning controlled by NC
SQUARING UNIT
• Liquid spray application group
• In-feed pre-milling unit RT20 composed by nr. 2 motors with vertical axis with pneumatic timer intervention – The unit allows manual adjustment according to the panel protrusion, with digital position indicator – It is composed by nr. 2 motors with automatic timer intervention to avoid splinters on the panel – Motors power 3,5 kW 9.000 rpm each
GLUING UNIT, LOADING AND PRESSURE OF EDGE 
• Gluing unit for PU glue
• Premelter NORDSON
• Magazine for edge coils with nr. 12 positions
• Guillotine to cut the edge in rolls with automatic regulation of the shear pressure
• Edge pressure roller with timed rollers on straight profile – Nr. 1 + 3 pressure rollers
• Electronic regulation of the roller conveyor
• Automatic height adjustment of the edge-guide device
• Liquid spray application group
EDGEBANDING UNIT 
• End trimming unit IT90-S with Flex system which allows automatic adjustment of the excess edge – Composed by 2 motors with pneumatic tilting 0°/25° by NC – Motors power 0,65 kW 12.000 rpm each
• Rough trimming unit RS-10 – Automatic pneumatic exclusion – Composed by nr. 2 motors with pneumatic regulation on 2 motors – Motors power 2 kW 12.000 rpm each
• Fine trimming unit RF-40 for trimming and chamfering the edge – Positioning by NC – Automatic pneumatic exclusion by NC – Nr. 2 independent motors with pneumatic tilting 0°/25° – Motors power 1 kW 12.000 rpm each
• Rounding unit AR80 for automatic edge corners rounding – Nr. 2 electospindles ROTAX series that move on Cartesian axes – Axes movement by brushless motors – Double revolver magazine with nr. 8 positions for automatic management and tool change – Motors power 0,65 kW 12.000 rpm each
• Edge scraping unit RB40 – Positioning by NC – Complete of chips aspiration and chips collector – Automatic exclusion from NC 
• Glue scraping unit RC20 for the removal of excess glue equipped with 3 + 3 vertical pads with bearings – Automatic exclusion by NC
• Spray liquid application unit
• Overlapped oscillating brushing unit SZ30 with nr. 2 motors for cleaning and polishing the rounded edge – Automatic exclusion by NC
• Buffing unit PH-10
• Milling unit FP40 to perform profiles, hollows and grooves on the edge and on the top/bottom surface of the panels – The unit is composed by a tilting motor in 2 positions 0° and 90°, thanks to a pneumatic drive, controlled by NC – Tool rotation according to the direction of the panel – Y and Z motorized adjustment and controlled by NC – Motor power 7,5 kW 12.000 rpm
NORM AND OPTIONAL FOR SECURITY 
• CE Marks
• Protection and sound-proof cabin of the working units
• Suction system on the top of the protection cabin
Top